News & Events

AKTAKOM ASE-7012 Smoke Absorber

It is a well-known fact that soldering works are associated with harmful substances emission. The most dangerous components of solder smoke are the particles of abietic acid (rosin) capable of causing asthmatic reaction. In addition rosin particles or decay products of flux as a rule are heavily polluted with lead which is really dangerous. The main device used to solve this problem is a smoke absorber. AKTAKOM ASE-7012 is one of them…

Compact and precise AKTAKOM ATK-5307 digital ground tester

AKTAKOM ATK-5307 is a compact (7.5 x 5.5 x 3.03 in only) digital ground tester which is designed to measure resistance of different objects not charged with electricity.

Multifunctional temperature controlled station from AKTAKOM

Multifunction stations are very convenient since they represent universal systems combining the features necessary for both process types, soldering and desoldering. Such devices can be used by one specialist and significantly save the working space. AKTAKOM ASE-3107 multifunction soldering and desoldering station is especially developed for electronic product research, production and rework.

Compact and light-weight AKTAKOM APS-5305 DC power supply

AKTAKOM APS-5305 is a low-cost model of switching power supply. This DC power supply is designed to supply radio equipment with stabilized voltage or current when operating in debugging process, repair and laboratory research.

High performance power supply for laboratory research

AKTAKOM APS-7205 is a high performance 3-channel DC remote controlled programmable power supply which is designed to power radio devices with stabilized voltage or current and it is indispensable when testing the reaction of electronic equipment to the supply voltage changes.

Aktakom ATK-2200 – clamp meter for power factor measurement

All-purpose and reliable Aktakom ATK-2200 digital power clamp allows user to measure current and voltage strength as well as the value of active, reactive and full power in three-phase circuit of three- or four wires, balanced termination three-phase circuit, one-phase circuit of two- or three wires. These features make this power clamp perfect for electrical technician or power engineering specialist.

AKTAKOM ASE-4313 multifunctional soldering rework station – good solution for any repair and soldering task

AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.

AKTAKOM AEC-3536 ESD PU foaming chair

AKTAKOM has a wide range of ESD-safe chairs and we are ready to introduce one of them – AEC-3536 ESD PU foaming chair

AKTAKOM ATA-2504 clamp meter-adapter with 3 measurement modes

AKTAKOM ATA-2504 is a 2-in-1 model, it’s a compact clamp meter and adapter in one housing. If you connect it to a multimeter the measurement results will be displayed on the display of this multimeter. In case of connecting ATA-2504 to an oscilloscope you will be able of researching a signal waveform.

AKTAKOM AEC-3534 ESD-safe laboratory chair

As we know it’s necessary to pay special attention to means of protection against electrostatic charging when equipping modern electronics production. For this purpose AKTAKOM has special ESD-safe laboratory chairs of different design. One of them is AEC-3534.