AME-8821-05 Non-invasive AC Sensor (5A max)
|
|
AME-8821-05 is a non-invasive AC sensor (5A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control. Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm. Lead wire length: 4.9 ft / 1.5 m. Ø3.5, three-pin.
|
|
AME-8821-10 Non-invasive AC Sensor (10A max)
|
|
AME-8821-10 is a non-invasive AC sensor (10A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control. Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm. Lead wire length: 4.9 ft / 1.5 m. Ø3.5, three-pin. |
|
AME-8821-100 Non-invasive AC Sensor (100A max)
|
|
AME-8821-100 is a non-invasive AC sensor (100A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control. Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm. Lead wire length: 4.9 ft / 1.5 m. Ø3.5, three-pin. |
|
AME-8821-20 Non-invasive AC Sensor (20A max)
|
|
AME-8821-20 is a non-invasive AC sensor (20A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control. Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm. Lead wire length: 4.9 ft / 1.5 m. Ø3.5, three-pin. |
|
AME-8821-30 Non-invasive AC Sensor (30A max)
|
|
AME-8821-30 is a non-invasive AC sensor (30A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control. Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm. Lead wire length: 4.9 ft / 1.5 m. Ø3.5, three-pin. |
|
AME-8821-50 Non-invasive AC Sensor (50A max)
|
|
AME-8821-50 is a non-invasive AC sensor (50A max), there is a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control. Capture parameter: 0.5 in x 0.5 in / 13 mm x 13 mm. Lead wire length: 4.9 ft / 1.5 m. Ø3.5, three-pin. |
|