2 in 1! AKTAKOM ATK-2103 clamp meter and multimeter

06.06.2022

You no longer need to buy these two separate devices if you need them both for work. AKTAKOM ATK-2103 is a clamp meter but at the same time it can be used as a multimeter!

ATK-2103 is capable of measuring up to 8 electric quantities, continuity testing. Big diameter of clamp meter jaws allows you to measure current in flat wires 2.4 in / 60 mm wide as well as round wires with 2 in / 50 mm diameter.

Features:

• 2 in 1, 2000 A clamp meter + Digital multimeter
• True RMS reading for ACV & ACA measurement
• 4000 counts, Auto range, multi-functions for ACA, DCA, ACV, DCV, Ohms, Capacitance, Hz, Duty cycle, diode and continuity test
• Wide ranges (2000A, 400 A) clamp on current measurement both for ACA and DCA
• 4 ranges (400 µA, 4000 µA, 40 mA, 400 mA) direct current input measurement both for ACA and DCA
• LSI circuit provides high reliability and durability
• Overload protection circuit is provided for all ranges
• Data hold
• Backlight

General specifications:

• Display: 0.6 in / 15 mm, 4 digit LCD, max. indication: 4000
• Measurement range: ACA, DCA, ACV, DCV, Ohms, Capacitance, Hz, Duty cycle, diode and continuity test
• Polarity: Automatic switching
• Current Sensor: Hall effect sensor
• Over-input: Indication of "1" or "-1"
• Sampling time: 0.35 sec. approx.
• Battery: DC 9V battery, heavy duty or Alkaline type, 006P, MN1604 ( PP3) or equivalent
• Power consumption: approx. DC 5 mA
• Operating temperature: 32°F to 122°F / 0°C to 50°C
• Operating humidity: less than 80% RH
• Dimensions: 10 x 2.9 x 1.5 in / 255 x 73 x 38 mm
• Weight: 0.85 lb / 380 g

More details can be checked on page of AKTAKOM ATK-2103.