ATH-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel

AKTAKOM ATH-3333 Power supply with digital indication is designed for the use in debugging process, repair or in laboratory research.

ATH-3333 power supply outputs smoothly regulated stabilized DC Voltage up to 30V and stabilized current up to 3A.

• 3 digit LCDs – 4 pcs
• Short circuit protection
• Stabilization mode (current, voltage)

Specifications:

• Number of channels: 3
• Output voltage (channel 1 and 2): 0...30 V x 2
• Output current (channel 1 and 2): 0…3 A x 2
• Output voltage/current (channel 3): 5V / 3A
• Inaccuracy of output voltage setting: 1% + 2 digits
• Inaccuracy of output current setting: 2% + 2 digits
• Voltage ripple and noise, RMS (typical): 1mV
• Current ripple and noise, RMS (typical): 2mA
• Power supply: 110V/220V
• Dimensions: 14.4 x 6.5 x 10.4 in / 365 x 164 x 265 mm;
• Weight: 22.1 lb / 10.5 kg.

Standard accessories:

• Power cord
• User manual

ATH-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel - Rear view Enlarge

ATH-3333 DC Power Supply 2 x 30V; 2 x 3A; 5V/3A; 3 channel - Side view Enlarge

Frequently Asked Questions

May I use AKTAKOM power supplies to charge accumulators?

May I use AKTAKOM power supplies to charge accumulators?

AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device. Up