Electronic rotation test, high reliability. Large LCD display with backlight. Input voltage: 100V…660V (45-70 Hz). Current consumption: approx. 7 mA per phase. Custom one-chip of microprocessor LSI circuit. Power supply: DC 9V battery. 006P, MN1604 ( PP3 ) or equivalent. Power consumption: DC 8 mA. Dimensions: 3.9 x 1.9 x 1.0 in / 100 x 50 x 25 mm. Weight: 0.33 lb / 150 g.
AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.
Features:
Electronic rotation test, high reliability
Large LCD display with backlight
Input voltage: 100V…660V (45-70 Hz)
Specifications:
Input voltage: 100V…660V (45-70 Hz)
Current consumption: approx. 7 mA per phase
Custom one-chip of microprocessor LSI circuit
Power supply: DC 9V battery. 006P, MN1604 ( PP3 ) or equivalent
Power consumption: DC 8 mA
Operating temperature: 32°F to 122°F / 0°C to 50°C
How can I know when the battery should be replaced when operating AKTAKOM ACM-6060 tester?
ACM-6060 tester has an indicator of low battery charge. It appears in the left up corner of the LCD. However measurement may still be made for several hours after low battery indicator appears.
To replace the battery take the following steps:
Loose the screw for battery cover, take the battery cover away from the tester and remove the battery.
Replace it with 9V battery (Alkaline or heavy duty type) and reinstate the cover making sure the battery cover is secured well after the battery replacement.