ATH-8065 Programmable Electronic Load

Programmable electronic load is designed for the operation as a load when testing, setting and adjusting power blocks, amplifiers, sound reproducers and other radio equipment with supply voltage of up to 500V, load current of up to 30A and accepted power of up to 600 W. Operation modes: CV voltage stabilization, CC current stabilization, CR resistance stabilization, CW power stabilization, 2 combined modes: CC+CV, CR+CW. Protection: current, voltage, power, heat, wrong polarity connection. Soft launch function. Battery test. Dynamic test support with rising / falling edge setting. External triggering support. Voltage drop compensation. Operation per the list. Auto test. USB / RS-232 control. Dimensions: 16.9 x 4.1 x 17,9 in / 428 x 103.5 x 453.5 mm. Weight: 36,8lb / 17.6kg.

Main Features:

VFD display
Operation modes: CV voltage stabilization, CC current stabilization, CR resistance stabilization, CW power stabilization, 2 combined modes: CC+CV, CR+CW
Protection: current, voltage, power, heat, wrong polarity connection.
Soft launch function
Battery test
Dynamic test support with rising / falling edge setting
External triggering support
Voltage drop compensation
Operation per the list
Auto test
USB / RS-232 control

Specifications:

Input ratings	Power	600 W
	Current	0...30 A
	Voltage	0...500 V
CC mode	Range	0...3 A	0...30 A
	Resolution	1 mA	10 mA
	Accuracy	0.03%set value +0.05%range	0.03% set value +0.05% range
CV mode	Range	0.1...19.999 V	0.1...500 V
	Resolution	1 mV	10 mV
	Accuracy	0.03%set value +0.02%range	0.03%set value +0.05%range
CR mode	Range	0.03...10 kΩ	0.03...5 kΩ
	Resolution	16 bit	16 bit
	Accuracy	0.1%set value +0.1%range	0.1%set value+ 0.1%range
CW mode	Range	0...600 W	0...600 W
	Resolution	1 mW	10 mW
	Accuracy	0.1%set value +0.1%range	0.1%set value +0.1%range
Voltage measurement	Voltage	0...19.999 V	0...500 V
	Resolution	1 mV	10 mV
	Accuracy	0.015%set value+0.03%range	0.015%set value+0.03%range
Current measurement	Current	0...3 A	0..30 A
	Resolution	0.01 mA	0.1 mA
	Accuracy	0.03%set value +0.05%range	0.03%set value +0.08%range
Power measurement	Power	100 W	600W
	Resolution	1 mW	10 mW
	Accuracy	0.1%set value +0.1%range	0.1%set value +0.1%range
Battery test	Battery voltage: 0.1...150 V; Max. measurable capacity: 999 Ah; Resolution: 0.1 mA
Dynamic test	Operation per the list: switching: 0...25 kHz; 2.5 A/µs; T1&T2: 60 µs -999 s; Accuracy: ±(15% shift+10% range)
Soft launch; Time	1 ms; 2 ms; 5 ms; 10 ms; 20 ms; 50 ms; 100 ms; 200 ms; 500 ms; 1000 ms Accuracy: ±(15% shift +10% range)
Short circuit	Current (CC)	=3.3 A	= 33 A
	Voltage (CV)	0 V
	Resistance (CR)	= 100 mΩ
Dimensions	WHL (in/mm)	16.9 x 4.1 x 17,9 in / 428 x 103.5 x 453.5 mm
Weight	lb / kg	36,8lb / 17.6kg

ATH-8065 Programmable Electronic Load - Rear panel

Enlarge

ATH-8065 Programmable Electronic Load - Side view

Enlarge

ATH-8065 Programmable Electronic Load

Enlarge

Compatible Software

AKTAKOM ElectronicLoadPro (AELP)

AKTAKOM ElectronicLoadPro software is designed to control programmable electronic loads from a PC. This software allows to set up input voltage, current, resistance and power as well as supports electronic load advanced functions: dynamic and automatic testing, I-V curve scan, battery testing.

Back to the section