|
|
ASE-1106 ESD-Safe Temperature Controlled Soldering Station
ASE-1106 ESD-Safe Temperature Controlled Soldering Station
|
|
Soldering station with antistatic protection (ESD-safe). Used for soldering portable electronic appliances, modeling and development, as well as assemblage in small enterprises. Equipped with high-quality durable easy replaceable heating element. LED display. 392 to 896°F / 200 to 480°C temperature range; 60 W.
|
|
ASE-1106 is used for soldering portable electronic appliances, modeling and development, as well as assemblage in small enterprises.
AKTAKOM ASE-1106 soldering station is ESD-safe. This is an important requirement that should be met since the absence of antistatic protection may cause the damage of valuable electronic components with electro static discharge.
AKTAKOM ASE-1106 is equipped with high-quality heating element that can be easily replaced. Reliable and light-weighted structure of the housing fully isolates the heating element from the environment effect and therefore protects the heating element from corrosion providing its high durability accordingly.
ASE-1106 is equipped with a LED display clearly indicating the temperature.
Features:
- ESD-safe. Suitable for work with static-sensitive components
- High-quality heating element that can be easily replaced
- Heating element is used to low DC power supply to ensure ESD safe
- Temperature can be easily adjusted
- Handle of the heat gun is very light
- LED display indicates the temperature
Specifications:
- Power consumption: 60W
- Output voltage: AC 24V
- Temperature range: 392 to 896°F / 200 to 480°C
- LED display available indicating the temperature
- Dimensions: 6.1x4.5x3.6 in / 155x113x92 mm
- Weight: 3.7 lb / 1.68 kg
| ASE-1106 ESD-Safe Temperature Controlled Soldering Station |
|
|
| ASE-1106 ESD-Safe Temperature Controlled Soldering Station |
|
|
| ASE-1106 ESD-Safe Temperature Controlled Soldering Station |
|
|
|
Safety instructions
Take care of yourself!
- Please read user manual carefully before using the instrument.
- Do not use the device if there is visible damage.
- Repair and maintenance of the device can be done only by a qualified specialist of the service center.
- Before connecting the instrument to the electrical network, observe all known precautions, and make sure that the grounding system is to avoid electric shock.
- Use only those accessories that are intended for use with this device.
- While working, do not touch the metal parts near the tip of the soldering iron.
- After completion of the work, it is necessary to install the soldering gun in the regular holder of the soldering gun.
Frequently Asked Questions
Is it possible to connect AKTAKOM ASE-1209 soldering tweezers to ASE-1105 or ASE-1106 soldering station for joint use?
How can I set the required temperature when operating AKTAKOM ASE-1106 soldering station?
How to care and use of the soldering tip?
How to clean the tip?
What temperature should use for soldering?
Why a "de-tinned" tip fails to work?
| Is it possible to connect AKTAKOM ASE-1209 soldering tweezers to ASE-1105 or ASE-1106 soldering station for joint use? |
No, it’s impossible. AKTAKOM ASE-1209 soldering tweezers and ASE-1105 (ASE-1106) soldering station have incompatible connection terminals.
Up
|
| How can I set the required temperature when operating AKTAKOM ASE-1106 soldering station? |
- Power on AKTAKOM ASE-1106 soldering station setting the power switch to On position. The LED indicator will light.
- Turn the temperature control knob, the present temperature will be displayed on the device screen. Within several seconds the temperature value on the display will be changing.
- When the temperature reaches the preset temperature the soldering station will make a short sound signal meaning the soldering station is ready for work.
Up
|
| How to care and use of the soldering tip? |
|
High soldering temperatures can degrade the tip. Use the lowest possible soldering temperature. The excellent thermal recovery characteristics ensure efficient and effective soldering event at low temperatures. This also protects the sensitive components from thermal damage. Clean the tip regularly with a cleaning sponge, as oxides and carbides from the solder and flux can form impurities on the tip. These impurities can result in defective joints or reduce the tip's heat conductivity. When using the soldering iron continuously, be sure to loosen the tip and remove all oxides least once a week. This helps to prevent reduction of the tip temperature. Never leave the soldering iron sitting at high temperature for long periods of time, as the tip's solder plating will be covered with oxide, which can greatly reduce the tip's heat conductivity. Wipe the tip and coat it with fresh solder after use. This helps to prevent tip oxidation.
Up
|
| How to clean the tip? |
|
Caution! Never file the tip to remove oxide.
- Set the temperature to 250°C.
- When the temperature stabilizes, clean the tip with the cleaning sponge and check the condition of the tip.
- If there is black oxide on the solder-plated portion of the tip, apply new solder (containing flux) and wipe the tip on the cleaning sponge. Repeat until the oxide is completely removed. Coat with new solder. The solder protects the tip from oxidation and prolongs the life of the tip.
- If the tip is deformed or heavily eroded, replace it with a new one.
Up
|
| What temperature should use for soldering? |
600°- 650°F (316°- 343°C) is a good place to start for lead-based solder and 650°- 700°F (343°- 371°C) for lead-free solder.
Note: if clots form, the temperature is too low.
Up
|
| Why a "de-tinned" tip fails to work? |
|
A de-tinned tip is one which cannot wet with solder. This exposes the plating to oxidation and degrades the heat transfer efficiency of the tip.
The de-tinning is caused by:
1) Failure to keep the tip covered with fresh solder while not in use.
2) High tip temperatures.
3) Insufficient melting in soldering operations.
4) Wiping the tip on dirty or dry sponges and rags (Always use a clean, wet, industrial grade, sulfur-free sponge).
5) Impurities in the solder, iron plating, or on the surfaces to be soldered.
Up
|
Back to the section
|
|
