Aktakom ATE Easy Monitor (ATEE Monitor)

AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format. For the device connection the use of ACE-1025/ACE-1026 USB-RS232 interface converters is required.

Compatible with: ATE-1033 Thermo-Anemometer, ATE-1033BT Thermo-Anemometer. Real time SD memory card Datalogger with Bluetooth interface, ATE-1034 Hot Wire Anemometer, ATE-1034BT Hot Wire Anemometer, Real time SD memory card Datalogger with Bluetooth interface, ATT-1004 Hot Wire Anemometer, ACE-1025 Interface Converter, ACE-1026 Interface Converter, ATE-1537 Light meter, ATT-8509 Electromagnetic field meter, ATE-3012 Oxygen Meter, ATE-3012BT Oxygen Meter with Bluetooth interface, ATE-9030 Sound Level Meter, ATE-9030BT Sound Level Meter with Bluetooth interface, ATE-2002 Thermometer, ATE-2036 Thermometer, ATE-2036BT Thermometer, Real Time SD Memory Card Datalogger with Bluetooth interface, ATE-5035 Humidity/Temperature Meter, ATE-5035BT Humidity/Temp. Meter, Real time SD memory card Datalogger with Bluetooth interface, ATE-9380 Thermometer Monitor, ATE-9382 Humidity/Baro/Temp. Monitor, ATT-9002 Vibration meter

For Windows^®
Supported OS: Windows XP x32, Windows XP x64, Windows 7 x32, Windows 7 x64, Windows 8 x32, Windows 8 x64

Where to buy

AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format.

“Initialization” section allows connecting to the device (when the program is run the connection is automatical) and specifying data polling period in seconds.

“Channel 1…4” sections display the received measurement results and show the time when these results were received.

“Data record into file” section allows you to select the file for data recording (CSV text format is used). After you select the file press record button to start or stop the recording of new measurement data into file.

“Help” button is used to call for the help file.

“Exit” button is used to finish the software operation.

For this program use you need to use ACE-1025 USB-RS232(TTL) interface converters or ACE-1026 depending on the compatible device type (to check the compatibility check the web page of the ACE-1025 or ACE-1026 interface converters).

AKTAKOM ATE Easy Monitor software provides the numerical indication of 4 channel measurements as well as the data recording into file in CSV format. This is the simplest variant for automation of long-termed measurements which results should be analyzed or processed in MS Exel further on.

The limitation for the file size of the recorded data is not covered by the program. The file size can be limited only by the requirements of the operating system and memory. But please note that MS Exel open CSV-type file with 64K lines.

1 time per second measurement corresponds to measurement data for approximately 18 hours.
1 time per 3 seconds measurement corresponds to measurement data for approximately 2.2 days.
1 time per second measurement corresponds to measurement data for approximately 3.8 days.

If you need to process data (files) with measurement results of over 64K you should use ADLM - AKTAKOM Data Logger Monitor-W (for operating system Windows including Windows 8) or AKTAKOM Data Logger Monitor-A (for Android operating system).

System requirements:

Window XP and higher,
USB port,
5 Mb of free space on the hard disk.

Standard package

The software in the standard package of the device has no physical media (CD) and can be downloaded at www.tmatlantic.com after the purchasing and registering the equipment with a serial number. This software is paid-for and its cost is included into device value.

In the new version of the software, when connecting the unit for the first time, it will ask for a license (access key). It is available online after product registration. Insert the entire character set by coping and pasting it from www.tmatlantic.com. Follow the instructions on the site. We recommend that you make and keep a copy of the downloaded software. Follow the our websites news releases to receive software updates.

Frequently Asked Questions

How to install Aktakom ATE Easy Monitor (ATEEM) Software?

How to install Aktakom ATE Easy Monitor (ATEEM) Software?
Run the installation file ATEEM_Setup.exe. Follow the instruction of how to install ATEEM software. If during the installation process you selected item “Install USB driver” this will lead to automatic driver installation for ACE interface model after the software is installed. After the installation restart the computer otherwise the program may fail to connect to the interface module. Up

ALL RIGHTS RESERVED. AKTAKOM™ software is protected under International and Federal Copyright Laws and Treaties. Any unauthorized copy, reprint or use of this material is prohibited. No part of this software may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written permission from the author / publisher.

Windows, Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Back to the section