DP-100 Attenuator

Max differential voltage: 7000V (DC + AC peak) or 450Vrms. Max voltage between each input terminal and ground: 6500Vrms. Bandwidth: DC - to 100MHz for x200, x500 and x1000 DC - to 50MHz (for attenuation x 100). Attenuation: x100, x200, x500, x1000. Input Impendance: Differential: 54MΩ / 1.2pF, between terminals and ground: 27MΩ / 2.3 pF

The DP-100 differential probe provides a safety means for measuring differential voltage for all models of oscilloscopes.

The DP-100 converts high differential voltage into low voltage and displays the result on the oscilloscope screen. DP-100 is designed to operate with 1MΩ impendance oscilloscopes. When combining with the 50Ω load, the attenuation will be 2 times.

Specifications

Bandwidth	DC - to 100MHz (-3 dB) for x 200, x 500 and x 1000 DC - to 50MHz (for attenuation x 100)
Attenuation	x 100, x 200, x 500, x 1000
Accuracy	±2%
Voltage Input Ranges (DC + AC peak to peak)	≤ 700 Vp-p for x 100 (i.e. about 230 Vrms or DC) ≤ 1400 Vp-p for x 200 (i.e. about 460 Vrms or DC) ≤ 3500Vp-p for x 500 (i.e. about 1140 Vrms or DC) ≤ 7000 Vp-p for x 1000 (i.e. about 2300 Vrms or DC)
Permitted Max Input Voltage	Max differential voltage: 7000V (DC +AC peak to peak). Max voltage between each input terminal and ground: 6500Vrms
Input Impendance	Differential: 54MΩ / 1.2pF Between terminals and ground: 27MΩ / 2.3 pF
Output	≤ ±7.0V
Output Impendance	50Ω
Input Impendance	Differential: 54MΩ / 1.2pF Between terminals and ground: 27MΩ / 2.3 pF
Rise Time	3.5ns for x 200, x 500, and x 1000; 7ns for x 100
Rejection Rate on Common mode	60Hz: > 80dB; 100Hz > 60dB; 1MHz > 50dB
Power Supply	Only External 9V DC power supply
Consumption	35mA max (0.4 Watt)

Dimensions and Weight: 9.5x3.2x1.2in / 240x80x30 mm; 0,6 lb / 280g
Electrical Safety to IEC 1010-1
- Dual Insulation
- Insulation Category III
- Degree of Pollution 2
- Rated Voltage or Max Line-Earth: 6500Vrms