Search
Log in
Login:
Password:
Register
Forgot your password?

ATH-3335 Power Supply


Power supply designed for the use in debugging process, repair or in laboratory research. 3 digit LCDs 4 pcs. Short circuit protection. Stabilization mode (current, voltage). 3 channels. Output voltage (channel 1 and 2): 0...30 V x 2. Output current (channel 1 and 2): 05A x 2. Output voltage/current (channel 3): 5V / 3A. 1%Uset+2 emp. 2%Iset+2 emp. Dimensions and weight (in the package): 8.5 x 15 x 17 in / 220 x 380 x 430 mm; 23.2 lb / 10.5 kg.

Specifications:

  • Number of channels: 3
  • Output voltage (channel 1 and 2): 0...30 V x 2
  • Output current (channel 1 and 2): 0…5A x 2
  • Output voltage/current (channel 3): 5V / 3A
  • Inaccuracy of output voltage setting: 1%Uset+2 emp
  • Inaccuracy of output current setting: 2%Iset+2 emp
  • Voltage ripple and noise, RMS (typical): 1mV
  • Current ripple and noise, RMS (typical): 2mA
  • Power supply: 110V/220V
  • Dimensions and weight (in the package): 8.5 x 15 x 17 in / 220 x 380 x 430 mm; 23.2 lb / 10.5 kg

Standard accessories:

  • Power cord
  • User manual

Frequently Asked Questions

  • May I use AKTAKOM power supplies to charge accumulators?

  • May I use AKTAKOM power supplies to charge accumulators?

    AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.


    Up


    Back to the section
    AKTAKOM - the Best in Test Award Winner!