Search
Log in
Login:
Password:
Register
Forgot your password?

ATK-6010 Phase Interlacing Pointer


Phase interlacing pointer capable of determining phase interlacing when connecting to three-phase receivers. Voltage range: 110...480 V; Frequency range: 40...70 Hz. Insulation dielectric strength: 2000 V; Insulation resistance: 100 MΩ. Test leads length: 1.2 m. Deviation: ±15° (horizontal). Dimensions: 2.8 x 3.7 x 2.1 in / 70 x 95 x 55 mm. Weight: 0.6 lb / 280 g.

Specifications:

  • Voltage range: 110...480 V;
  • Frequency range: 40...70 Hz.
  • Test time:
    • 480 V - 4 min.
    • 220 V - 30 min.
    • 110 V – long time.
  • Insulation dielectric strength: 2000 V;
  • Insulation resistance: 100 MΩ.
  • Test leads length: 1.2 m.
  • Deviation: ±15° (horizontal).
  • Fuse: 0.5A /700 B.
  • Power supply: from the circuit under test.
  • Dimensions: 2.8 x 3.7 x 2.1 in / 70 x 95 x 55 mm.
  • Weight: 0.6 lb / 280 g.

Standard accessories:

  • Fuse
  • User manual
  • Carrying case

Frequently Asked Questions

  • How can I make sure that AKTAKOM ATK-6010 phase interlacing pointer operates correctly?

  • How can I make sure that AKTAKOM ATK-6010 phase interlacing pointer operates correctly?

    In order to check the correct operation of AKTAKOM ATK-6010 phase interlacing pointer connect it to the network with the correct phase sequence and make sure the pointer turns in the line of the arrow.

    1. Connect ATK-6010 to the phases of three-phase network with the test leads and alligator clips.
    2. If the pointer turns in the line of the arrow the order of sequence is as follows: R (red) – S (yellow) – T (Green).

    ATK-6010 can be also used in the horizontal condition (slope angle is ±15° at max.). Failure to meet this condition can cause the turning pointer defect and wrong test results.


    Up


    Back to the section
    AKTAKOM AMM-4189 Digital Multimeter & Oscilloscope