Search
Log in
Login:
Password:
Register
Forgot your password?

AM-6000 Milliohm Meter

Display: 18mm (0.7") LCD (Liquid Crystal Display). Max. indication 1999. Range: 200 m ohm, 2,000 m ohm, 20 ohm, 200 ohm, 2000 ohm. Zero Adjustment: External adjustment for zero value of the display. Input Terminal: 4 terminal input, accurate for low ohms measuring. Over input Indication: Indication of “1”. Sampling Time: Approx. 0.4 sec. Operating Temp.: 0°C to 50°C (32°F to 122°C). Operating Humidity: Less than 80%R.H. Power Supply: AC 110V 15%, 50/60Hz or AC 220V/240V 15%, 50/60Hz. Power Consumption: Approx. 2VA

Manuals: 
User's Manual (1.69 Mb)

AKTAKOM AM-6000 Milliohm Meter is ideal for measuring the resistance of the motor coil, transformer, PCB layout.

Features

  • 4 terminal devices for accurate measurement of very low resistance
  • Ideal for testing protective conductors, lightning conductors and welded points
  • Wide measuring range, 0.1 m ohm – 2000 ohm, 5 ranges
  • 18mm (0.7"), large size LCD display, easy to read-out
  • LSI circuit provides high accuracy, reliability and durability
  • Built-in over input indication
  • Durable and portable housing plastic case with the front protective cover

Specifications

General specifications:

Display: 18mm (0.7") LCD (Liquid Crystal Display). Max. indication 1999.
Range: 200 m ohm, 2,000 m ohm, 20 ohm, 200 ohm, 2000 ohm
Zero Adjustment: External adjustment for zero value of the display
Input Terminal: 4 terminal input, accurate for low ohms measuring
Over input Indication: Indication of “1”
Sampling Time: Approx. 0.4 sec
Operating Temp.: 0°C to 50°C (32°F to 122°C)
Operating Humidity: Less than 80%R.H.

Power Supply:

  • AC 110V 15%, 50/60Hz
  • or AC 220V/240V 15%, 50/60Hz

Power Consumption: Approx. 2VA

Electrical specifications (23±5°C):

Range Resolution Test current Accuracy Open circuit voltage
200 m ohm 0.1 m ohm 100mA ±(0.75%+4d) Approx. 3.8VDC
2000 m ohm 1 m ohm 10mA ±(0.75%+2d) Approx. 3.4VDC
20 ohm 10 m ohm 10mA Approx. 3.4VDC
200 ohm 0.1 ohm 1mA Approx. 3.2VDC
2000 ohm 1 ohm 1mA Approx. 3.2VDC

Remark: When order the MILLIOHM METER you should inform about the power supply type which is AC 110V, 220V/240V, moreover you should indicate the plug type (USA, GERMANY) of the power cord

Dimensions: 6.3x4.7x3.4in/160x120x85mm, with housing front cover

Weight: Approx. 1.5lb/680g

Standard Accessories

  • Power cable

  • 4 wire with 2 clips

  • User Manual

Frequently Asked Questions

  • How can I measure low resistance with AKTAKOM AM-6000 Milliohm Meter?

  • How can I measure low resistance with AKTAKOM AM-6000 Milliohm Meter?

    There is four-wire (4-wire) scheme implemented to take the precise measurement of low resistance with AM-6000 and to escape the affect of stray resistance and the measurement leads resistance.

    Pic. 1

    On every measurement sub-range they use its own test current Is which flows from T2 to T1 terminal. The same current flows through the resistance under measurement R (resistor). AM-6000 measures voltage Vx on P1 and P2 terminals which equals as follows:

    Vx=Is * Rx

    In accordance with Vx value the device automatically counts the value of the unknown resistance Rx.

    Rx=Vx/Is

    Thus the stray resistance of the measurement leads doesn't affect the measured resistance between P1 and P2 terminals.

    To measure the resistor resistance it’s necessary to connect the clamps of the measurement leads to the resistance under test (like it’s shown in Pic. 1) and to measure the resistance of the circuit section on a board you need to connect the clamps the way it’s shown in Pic. 2.

    Pic. 2


    Up


    Back to the section