Search
Log in
Login:
Password:
Register
Forgot your password?

AM-3055 Multimeter for SMD


RC-Meter, measurement of resistance up to 60 Ohms, capacitance up to 60mF, continuity test, auto turn-off, auto-scan mode.

AKTAKOM AM-3055 is an auto scan Pen R/C/D Meter in a single box with tweezers. Automatic recognize resistance, capacitance and diode. Measure high resistance and capacitance quickly. Specifically designed for use with SMD components on board circuits. Ideal for electronic maintenance, industry or homework.

Specifications

Function Range Resolution Accuracy
Resistance 300mΩ / 3kΩ / 30kΩ / 300kΩ / 3MΩ / 30MΩ / 600Ω / 6kΩ / 60kΩ / 600kΩ / 6MΩ / 60MΩ 0,1Ω (1%+5)
Capacitance 3nF / 30nF / 300nF / 3μF / 30μF / 300μF / 3mF / 30mF / 6nF / 60nF / 600nF / 6μF / 60μF / 600μF / 6mF / 60mF 1pF (3%+5)
Auto-scan mode 0...3 MΩ / 400 pF...300 μF
(1%+5)
0...6 MΩ / 400 pF...600 μF
(3%+5)

  • Supply: 3V, battery
  • Size: 181x35x20mm / 7.1x1.4x0.9in
  • Weight: 65g / 2.3oz

Capacitance measurement

To avoid electrical shock or damages to the meter under test, disconnect circuit power and discharge all high-voltage capacitors before measuring capacitance. Keep two pins of the capacitance in short before measuring.

  • Press FUNC. Key and select the function at mode.
  • Connect the test clip to the capacitor being measured and read the displayed value.

Capacitance Measurement

NOTE:

  • When this mode the RANGE key is available.
  • Discharge the capacitor before measuring.

Resistance measurement

To avoid electrical shock or damages to the meter under test, disconnect circuit power and discharge all high-voltage capacitors before measuring resistance.

  • Press FUNC. key and select the function at resistance symbol mode.
  • Connect the test clip to the object being measured and the measured value will show on the display.

Resistance Measurement

NOTE:

  • When this mode the RANGE key is available.
  • When the input is not connected, i.e. at open circuit, the figure "OL" will be displayed for the overrange condition.

Continuity check

  • Press FUNC. Key and select the function at mode
  • Connect the test clip to the resistance. If continuity exists (i.e., resistance less than 30Ω) built – in buzzer will sound.

Diode measurement

To avoid electrical shock or damages to the meter under test, disconnect circuit power and discharge all high-voltage capacitors before testing diodes.

  • Press FUNC. Key and select the function at mode.
  • Connect the + pin to the anode, the - pin to the cathode of the diode under testing.
  • The meter will show the approx. forward voltage of the diode. If the lead connection is reversed, only figure "OL" displayed.

Frequently Asked Questions

  • How can I set auto measurement mode on Aktakom AM-3055 Multimeter for SMD (Surface Mount Device)?
  • Does Aktakom AM-3055 Multimeter for SMD (Surface Mount Device) have auto power off mode?

  • How can I set auto measurement mode on Aktakom AM-3055 Multimeter for SMD (Surface Mount Device)?

    Press and hold FUNC button for over 1 sec.: Aktakom AM-3055 multimeter for SMD will turn on and enter measurement auto setting mode. Now you may start the operation: measure resistance or capacity, take continuity or diode testing.
    Up

    Does Aktakom AM-3055 Multimeter for SMD (Surface Mount Device) have auto power off mode?

    Yes, it does. Auto power off mode that Aktakom AM-3055 Multimeter for SMD has helps to prolong the battery life. If no button was pressed within 10 minutes you will hear a beep signal and the device will automatically go off. In this case all of the current device settings will be saved by the time of switching off.
    Up


    Back to the section