ACM-2036 Clamp Meter
Controls of AKTAKOM ACM-2036 Clamp Meter
AC/DC Voltage Measurements
Non-Contact AC Voltage Measurement
Warning: Risk of Electrocution. Before use, always test the Voltage Detector on a known live circuit to verify proper operation
NOTE: The conductors in electrical cord sets are often twisted. For best results, rub the probe tip along a length of the cord to assure placing the tip in close proximity to the live conductor.
The DC Zero feature removes offset values and improves accuracy for DC current measurement. To perform zero, select ADC with no conductor in the jaw:
MAX/MIN (DCA,DCV,ACV, Resistance range)
Data Hold & Backlight button
To freeze the current reading on the LCD, press “Data Hold & Backlight” key. The word HOLD will appear on the LCD while the meter is in the Data Hold mode. To release the Data Hold function and return the meter to normal operation, press “Hold Backlight” key again. The word HOLD will be switched off. The backlight function illuminates the display and is used when the ambient light is too low to permit viewing of the displayed readings. Press Data Hold & Backlight button for 2 second to turn the backlight on and press the button for the second time to turn the backlight off.
Frequently Asked Questions
Back to the section