Search
Log in
Login:
Password:
Register
Forgot your password?

News & Events

RSS

Dual channel function/arbitrary waveform generator AWG-4150 from AKTAKOM
Dual channel function/arbitrary waveform generator AWG-4150 from AKTAKOM

01.10.2019 | 199
AKTAKOM AWG-4150 generator is designed using direct digital synthesis (DDS) technology which ensures high frequency accuracy, low distortion, a fast transition from one frequency to another and lots of other high metrological parameters. AWG-4150 represents both function and arbitrary waveform generator.

AKTAKOM APS-7306 power supply
AKTAKOM APS-7306 power supply

23.09.2019 | 178
Our Online store has a wide range of power supplies. AKTAKOM APS-7306 is a DC programmable power supply which is designed to power radio technical equipment with stabilized voltage and current in repair process, laboratory research.

2-in-1: thermometer and datalogger. AKTAKOM ATE-2036
2-in-1: thermometer and datalogger. AKTAKOM ATE-2036

16.09.2019 | 152
Multichannel AKTAKOM ATE-2036 thermometer and datalogger is capable of temperature measuring simultaneously on four channels using K-, J-, T-, E-, R- and S-type thermocouples or on two channels with platinum thermal resistance.

AKTAKOM ASE-1128 soldering station for $11 only!
AKTAKOM ASE-1128 soldering station for $11 only!

04.09.2019 | 176
New Aktakom soldering station is a perfect addition to our soldering station range. Due to its compactness it occupies a very small working area making your work easy and convenient. In spite of its small size its power (8W) and wide temperature range (100C - 450C) allow ASE-1128 to make all types of work which can be made by any other more massive models.

Compact and powerful rework station - AKTAKOM ASE-4509
Compact and powerful rework station - AKTAKOM ASE-4509

21.08.2019 | 225
AKTAKOM ASE-4509 rework station offers an excellent solution for desoldering work. It is very easy for operation and can be widely used in the repairing and reworking areas and on most SMD rework job, like SOIC, CHIP, QFP, PLCC, BGA etc.

Electromagnetic field monitoring with AKTAKOM ATT-2592 tester
Electromagnetic field monitoring with AKTAKOM ATT-2592 tester

07.08.2019 | 205
AKTAKOM ATT-2592 portable electromagnetic field tester is designed for safe measurement of electromagnetic field characteristics by isotropic method. The device is equipped with a 3-channel sensor that allows taking measurements simultaneously on three axes: X, Y, Z.

AKTAKOM ATT-6000 tachometer for noncontact measurement in hard-to-reach spaces
AKTAKOM ATT-6000 tachometer for noncontact measurement in hard-to-reach spaces

26.07.2019 | 328
AKTAKOM tachometers are specially designed for accurate measurements of rotation speed as well as the shaft angular velocity. AKTAKOM tachometers use various measurement methods: contact, contactless photo, contactless laser pointer. And the combination of different measurement methods in one device allows user to widen the application area. AKTAKOM ATT-6000 is a portable tachometer for noncontact measurement of rotation velocity in hard-to-reach places.

Compact and user-friendly AKTAKOM ATE-8702 magnetic meter
Compact and user-friendly AKTAKOM ATE-8702 magnetic meter

08.07.2019 | 227
AKTAKOM ATE-8702 magnetic meter (gaussmeter or teslameter) can be widely used to measure magnetic field parameters in industry, materials science, electrical engineering and laboratory studies. This model has expanded capabilities for large values measuring. Due to various measurement ranges it can be used for different measurement tasks.

AKTAKOM ACM-6060 Phase rotation tester
AKTAKOM ACM-6060 Phase rotation tester

20.06.2019 | 211
One of the important parameters of three phase networks is phase interlacing. Disregarding of this parameter can cause the equipment failure. AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.

Aktakom ATE-6006 tachometer to help service engineers
Aktakom ATE-6006 tachometer to help service engineers

07.06.2019 | 223
For service engineers working in production it often becomes necessary to measure shaft speed. And shaft diameter as well as the operation conditions may be different. What should they do in this case? Of course they may buy and use two different devices contact tachometer and contactless one. But there is some other more convenient solution to use a combined type tachometer like Aktakom ATT-6006.