News & Events
19.10.2020 | 4AKTAKOM ASE-1119 can be used in the fields of electronic research, teaching and production, especially in the repairing and soldering on the electronic appliances and communication equipment.
12.10.2020 | 17If you are looking for an efficient and at the same time powerful smoke absorber with low noise AKTAKOM ASE-7011 would be the right model to choose.
05.10.2020 | 24AM-7111 multifunctional process calibrator is designed to generate high-precision signals when testing and calibrating different types of equipment (probes, measurers, converters, controllers etc.) during repair or adjustment work.
28.09.2020 | 48As you know one of the most important requirements for the operation with small and valuable electronic components is reliable protection from electro static discharge. Our Catalogue has a soldering station model now that meets this requirement...
21.09.2020 | 68Our Online store has a wide range of power supplies. AKTAKOM APS-7306 is a DC programmable power supply which is designed to power radio technical equipment with stabilized voltage and current in repair process, laboratory research.
14.09.2020 | 66AKTAKOM ATT-9002 is a portable vibration meter which is designed to measure unbalanced response of mechanisms. Parameters under measurement: rate, RMS and peak measurement, velocity / acceleration measuring range.
07.09.2020 | 84Aktakom AEL-8321 programmable electronic load is designed to imitate various load operation modes when testing the power supplies of wireless devices with up to 80 V voltage, current of up to 40 A and the power of 400 W.
31.08.2020 | 115AKTAKOM AM-1171 multimeter is designed to measure DC and AC, DC and AC voltage, resistance, capacitance, frequency, diode control and continuity test. AM-1171 model can be also used for temperature measurement and can be connected to a PC via USB interface.
24.08.2020 | 249AKTAKOM ATH-1253 is of the most popular power supplies which is widely used in debugging process, repair and laboratory research. ATH-1253 outputs smoothly adjustable stabilized DC voltage and stabilized current.
17.08.2020 | 108You no longer need to buy these two separate devices if you need them both for work. AKTAKOM ATK-2103 is a clamp meter but at the same time it can be used as a multimeter! ATK-2103 is capable of measuring up to 8 electric quantities, continuity testing.
10.08.2020 | 115The range of AKTAKOM soldering stations is very wide and variable. You may always choose the right model for your purposes. We would like to draw your attention to AKTAKOM ASE-1116 soldering station which is used in traditional types of soldering as well as for lead-free.
03.08.2020 | 207If you are looking for a clamp meter Aktakom ATA-2502 clamp meter-adapter will be the most cost effective solution. For work it’s necessary to have any multimeter or voltmeter capable of measuring DC and AC voltage at the range of 200 mV and 2 V. If you connect the adapter to the multimeter the measurement results will be displayed on the multimeter screen. And if you connect the device to the oscilloscope you will be able to research the waveform.
27.07.2020 | 142AKTAKOM AMM-1008 digital multimeter offers high accuracy and all the measurement functions in a compact housing.
20.07.2020 | 167AKTAKOM ACM-2352 professional True RMS 1500A AC watt clamp meter provides accurate watt, AC current and voltage readings.
13.07.2020 | 173AKTAKOM AM-3123 LRC meter is a perfect combination of outstanding performance and convenience. Accurate measurements of passive-components can be achieved in all occasions for a long period of time.
06.07.2020 | 164Excellent soldering station AKTAKOM ASE-1115 (with max. consumed power 60W) is developed to suit wide temperature range and it is ideal for general purpose or specialized lead-free soldering applications.
29.06.2020 | 181AKTAKOM ATT-2592 portable electromagnetic field tester is designed for safe measurement of electromagnetic field characteristics by isotropic method. The device is equipped with a 3-channel sensor that allows taking measurements simultaneously on three axes: X, Y, Z.
22.06.2020 | 171AKTAKOM ATH-1333 is widely used in debugging process, repair and laboratory research since it outputs smoothly adjustable stabilized DC voltage and stabilized current. Moreover it’s a perfect power supply for science investigation, college, factory, electronic appliance maintenance and etc.
Social distancing equipment for your lab. AKTAKOM APS-7306L remote controlled, programmable power supply
12.06.2020 | 220Latest innovation from AKTAKOM allows you safely and remotely interact with your equipment while maintaining CDC recommended social distancing requirements. APS-7306L DC Programmable power supply is the updated version of world famous AKTAKOM APS-7305L. In 2013 at Best in Test Award competition annually held by American “Test & Measurement World” APS-7305L became the winner in 2 categories at once «Power supply» and «Test Product of the Year»!
01.06.2020 | 215The range of AKTAKOM power supplies has APS-1306 model which is perfect for repair services and in scientific and research laboratories. This model represents a single channel power supply equipped with dual LED display simultaneously displaying both voltage (up to 30 V) and current (up to 5 A).
25.05.2020 | 210Aktakom ACM-2036 is TrueRMS clamp meter, universal and compact device that also provides multimeter, non-contact voltage detector and a flashlight functions.
18.05.2020 | 233If you are looking for a compact and light weight penetration thermometer we’d like to your attention to AKTAKOM ATT-2065 model. One of the most important parameters for any technological processes is temperature. AKTAKOM ATT-2065 low-cost penetration thermometer has a wide temperature range which is perfect for quick measurement of internal temperature of different objects.
11.05.2020 | 254AKTAKOM ASE-1111 soldering station is used for electronic component mounting on PCB surface. This compact model is perfect for the use in such fields like electronic research, teaching and production, especially in the repairing and soldering on the electronic appliances and communication equipment.
04.05.2020 | 231AKTAKOM APS-5305 is a low-cost model of switching power supply. This DC power supply is designed to supply radio equipment with stabilized voltage or current when operating in debugging process, repair and laboratory research.
27.04.2020 | 343AKTAKOM AM-1019 digital multimeter is to be highly valued by specialists, solving wide range of professional tasks. High quantity and variety of this model options will allow you to choose functions mostly suitable for your work.
20.04.2020 | 260AKTAKOM ATE-1080 Anemometer can be used for environmental testing and in application to air conveyors, flow hoods, clean rooms, air velocity, air balancing, fans/motors/blowers, furnace velocity, refrigerated case, paint spray booths.
13.04.2020 | 254AMM-3035 RLC meter from AKTAKOM is a professional device which uses innovative technology allowing user to automatically measure the following parameters: inductance, capacity, resistance, Q factor, dissipation factor, phase factor.
06.04.2020 | 262AKTAKOM AHT-5020 professional tool kit is made for repair, service and debugging works in instrument engineering, computer technology and automation.
30.03.2020 | 248When laying or repairing cable routes it’s often necessary to detect cables and correctly determine their routes. And very often this is associated with a long time taken therefore, especially if the cable is located in a hard-to-reach place and if there are several cables in the conduit. Multifunctional AKTAKOM ACT-1112 cable locator is a perfect device for this type of work.
23.03.2020 | 246AKTAKOM AME-8821-xx series consist of several non-invasive AC sensors equipped with a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control.
16.03.2020 | 240AKTAKOM AWG-41xx series consists of 3 models with maximum generation frequency a follows: AWG-4105 (5 MHz), AWG-4110 (10 MHz), AWG-4150 (50 MHz). AWG-41xx series generators are designed using direct digital synthesis (DDS) technology…
09.03.2020 | 273The main feature of Aktakom ATE-9380 and ATE-9382 is their use for offline automatic monitoring of sensor data. Considering their intended use of course they do not have all of the customer-related functions like switching on/off the backlight, auto-powering off etc. But at the same time ATE-9380 and ATE-9382 have functions that other meters with SD memory card do not have.
02.03.2020 | 252AKTAKOM APS-3103L is a programmable power supply with adjustable current limit. This model is equipped with a large display showing voltage and current readings. Push button switch allows connection and removal of load...
23.02.2020 | 337As we know antistatic equipment is made for the control over electrostatics. AKTAKOM presents a wide range of antistatic wrist straps with high quality characteristics, low cost and which comfortably fit your wrist. They are AHT-5161, AHT-5163 and AHT-5165.
17.02.2020 | 302AKTAKOM ATT-1004 anemometer with a sensor is designed to measure air velocity of 0.5-20 m/s. The telescope probe represents a glass thermistor placed in a small measuring head of 0.5in / 12mm diameter on a telescopic handle.
10.02.2020 | 272Multifunction stations are very convenient since they represent universal systems combining the features necessary for both process types, soldering and desoldering. Such devices can be used by one specialist and significantly save the working space. AKTAKOM ASE-3107 multifunction soldering and desoldering station is especially developed for electronic product research, production and rework.
03.02.2020 | 257AKTAKOM APS-1503 DC power supply is used to supply radio equipment with stabilized voltage or current when operating in debugging process, repair and laboratory research.
27.01.2020 | 239AKTAKOM AM-2002 digital multifunctional insulation tester is designed to measure isolation resistance and smart electric circuits at various operating voltage. Besides the device has two additional measurement modes: the resistance measurement of low-resistance electric circuits and AC voltage measurement. These two additional modes significantly broaden the application field making the operation with this device easy and convenient.
20.01.2020 | 284AKTAKOM ACM-3192 is designed for one-phase and three-phase network operation. When operating with one-phase network ACM-3192 is capable of making analysis both for two- and three-wire lines; and when operating with three-phase networks – three- and four-wire lines. ACM-3192 is an analyzer of electric power quality and it can calculate almost all parameters of power supply.
03.01.2020 | 304AKTAKOM AM-1083 is a stable and battery-driven 3 1/2 digital multimeter. It is equipped with a large LCD clearly displaying the device measuring values. This multimeter can be used to measure DCV, ACV, DC, AC, resistance, capacitance, inductance, diode, triode, open circuit, temperature and frequency, as well as hold peak value. One of the features is the availability of overload protection.
24.12.2019 | 317Our Catalogue has a wide range of soldering stations. At the moment we’d like to draw your attention to AKTAKOM ASE-4204 2 in 1 soldering and rework station.
13.12.2019 | 369AKTAKOM ASE-1102 is a professional temperature controlled soldering station which is especially recommended for transistors and microchips assembly produced in accordance with CMOS technology. The temperature can be easily regulated with a rotary switch on the front panel.
25.11.2019 | 395Portable AKTAKOM ATE-1537 Light meter allows you to take fast and precise measurement of the illumination level from different light sources: day light, tungsten lamps, fluorescent and mercury lamps. ATE-1537 has a separate probe for easy operation in different measurement environment and real time SD memory card datalogger.
28.10.2019 | 382Aktakom range of soldering equipment has been much broadened recently. And one of the new and unusual models is ASE-4502 rework station. Due to its design ASE-4502 occupies a minimal working space organizing a high performance work area.
18.10.2019 | 392To protect electronic circuits when working with electronic components, boards and devices from potential danger it’s necessary to use protective ground equipment. AKTAKOM keeps a wide range of antistatic tools and equipment for this purpose.
07.10.2019 | 417In case you are looking for reliable solution to diagnose automotive equipment AKTAKOM AMM-1009 general purpose digital multimeter can be considered good decision therefore.
01.10.2019 | 419AKTAKOM AWG-4150 generator is designed using direct digital synthesis (DDS) technology which ensures high frequency accuracy, low distortion, a fast transition from one frequency to another and lots of other high metrological parameters. AWG-4150 represents both function and arbitrary waveform generator.
16.09.2019 | 371Multichannel AKTAKOM ATE-2036 thermometer and datalogger is capable of temperature measuring simultaneously on four channels using K-, J-, T-, E-, R- and S-type thermocouples or on two channels with platinum thermal resistance.
04.09.2019 | 391New Aktakom soldering station is a perfect addition to our soldering station range. Due to its compactness it occupies a very small working area making your work easy and convenient. In spite of its small size its power (8W) and wide temperature range (100°C - 450°C) allow ASE-1128 to make all types of work which can be made by any other more massive models.
21.08.2019 | 453AKTAKOM ASE-4509 rework station offers an excellent solution for desoldering work. It is very easy for operation and can be widely used in the repairing and reworking areas and on most SMD rework job, like SOIC, CHIP, QFP, PLCC, BGA etc.
26.07.2019 | 550AKTAKOM tachometers are specially designed for accurate measurements of rotation speed as well as the shaft angular velocity. AKTAKOM tachometers use various measurement methods: contact, contactless photo, contactless laser pointer. And the combination of different measurement methods in one device allows user to widen the application area. AKTAKOM ATT-6000 is a portable tachometer for noncontact measurement of rotation velocity in hard-to-reach places.
08.07.2019 | 438AKTAKOM ATE-8702 magnetic meter (gaussmeter or teslameter) can be widely used to measure magnetic field parameters in industry, materials science, electrical engineering and laboratory studies. This model has expanded capabilities for large values measuring. Due to various measurement ranges it can be used for different measurement tasks.
20.06.2019 | 451One of the important parameters of three phase networks is phase interlacing. Disregarding of this parameter can cause the equipment failure. AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.
07.06.2019 | 420For service engineers working in production it often becomes necessary to measure shaft speed. And shaft diameter as well as the operation conditions may be different. What should they do in this case? Of course they may buy and use two different devices – contact tachometer and contactless one. But there is some other more convenient solution to use a combined type tachometer like Aktakom ATT-6006.
24.05.2019 | 548AKTAKOM ATE-1034 hot-wire anemometer-thermometer is a compact device with wide functionality. Due to the small diameter of its probe (only 12 mm) this device is very convenient for using in hard-to-reach areas. Moreover the probe handle is extension-type (from 280 to 940 mm) which makes it possible to broaden the ranges of this anemometer use.
15.04.2019 | 909AKTAKOM APS-7205 is a high performance 3-channel DC remote controlled programmable power supply which is designed to power radio devices with stabilized voltage or current and it is indispensable when testing the reaction of electronic equipment to the supply voltage changes.
14.03.2019 | 623AKTAKOM ASE-2105 is designed for lead free desoldering. The quick heating and strong power are the best terms for clear soldering / desoldering of all DIP components types. This model is used in the field of electronic research, teaching and production, especially in the repairing and desoldering on the electronic appliances and communication equipment.
04.03.2019 | 558The most convenient device is a portable oscilloscope with a built-in multimeter. Users demand light weighted equipment that may let them save the space in their bags and take such a device into the field. Moreover such devices have batteries. Today already you have a chance to buy AKTAKOM ADS-6122H oscilloscope with built-in multimeter option.
16.01.2019 | 746AKTAKOM ADS-2221MV oscilloscope can be considered a mixed model because on one hand it has a benchtop design but at the same time ultraslim, lightweight housing and battery powering allows considering it a handheld device that can be easily used in the field terms.
24.10.2018 | 727Herewith we are glad to inform of two new professional soldering stations in our Online store! Both new AKTAKOM ASE-1105 and ASE-1106 are ESD-safe. This is an important requirement that should be met since the absence of antistatic protection may cause the damage of valuable electronic components with electro static discharge.
01.10.2018 | 805To make it easy for our users to operate AKTAKOM equipment we publish the answers for the frequently asked questions. In the present piece of news we’d like to share some tips for ASE-7012 filter replacement.
10.09.2018 | 823It is a well-known fact that soldering works are associated with harmful substances emission. The most dangerous components of solder smoke are the particles of abietic acid (rosin) capable of causing asthmatic reaction. In addition rosin particles or decay products of flux as a rule are heavily polluted with lead which is really dangerous. The main device used to solve this problem is a smoke absorber. New AKTAKOM ASE-7012 is one of them…
05.09.2018 | 882AKTAKOM ATH-8311 programmable electronic load is designed to emulate various load operation modes when researching and adjusting power supplies of wireless devices with up to 360 V supply voltage, up to 30A load current and 300W power consumption.
29.08.2018 | 699AKTAKOM AM-6007 milliohm meter is used to measure low values of resistance in circuits and their components, as well as contact resistance. Measurements are performed with 4-wire Kelvin clips that makes the measurement results much more precise.
22.08.2018 | 748Earlier to measure every single value you had to use 2 different measuring devices or do it one after another. What makes AKTAKOM AM-1109 multimeter special is the availability of 2 channels allowing user to take measurements of 2 values simultaneously.
06.08.2018 | 807AKTAKOM always provides precision equipment for professionals. And this is not only about test and measuring devices. Wide range of various tools in our store will help you to choose tweezers, pliers, cutters, screwdrivers or whole tool sets combining all necessary instruments for high precision work. AKTAKOM AHT-5069 screwdriver set is one of them.
16.07.2018 | 804One of the most popular AKTAKOM LCR-meters is AM-3001 which is widely used to measure LCR characteristics of radio-electronic components and electric circuits such as: inductance (L), capacity (C), resistance (R), quality factor (Q), dissipation factor (D) and deviation (Δ)
09.07.2018 | 1237Low-cost AKTAKOM ATH-3333 power supply with digital indication is designed for the use in debugging process, repair or in laboratory research.
AKTAKOM ASE-4313 multifunctional soldering rework station – good solution for any repair and soldering task
25.06.2018 | 912AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.
18.06.2018 | 746If your work requires the use of anemometer, hygrometer, thermometer and light meter you may purchase just 1 device combining them all. This model is AKTAKOM ATE-9508 4-in-1 multipurpose tester and it can be used to measure airflow speed, humidity, temperature and illumination level.
11.06.2018 | 1117AKTAKOM AM-1081 is a digital multimeter used to measure DC/AC current and voltage, resistance, capacity, frequency, diode test and continuity test. The embedded accumulator can be charged with a handheld generator, also AM-1081 can be powered with batteries.
04.06.2018 | 724High-performance AKTAKOM AMM-3320 RLC meter is a compact and convenient device that allows user to take quick and precise (basic error is 0.3%) measurements of such primary and secondary parameters like inductance, capacity, resistance, phase angle, Q-factor and dissipation factor.
14.05.2018 | 909AKTAKOM AEL-8320 and AEL-8321 will change your point of view about the capabilities of low-cost electronic loads. The functions of these models are very similar to electronic loads of professional series.
03.05.2018 | 798Since soldering and desoldering processes when repairing electronics are usually made sequentially by one specialist it’s obviously convenient to use a universal system combining the features necessary for both operation types. AKTAKOM ASE-3101 professional dual-channel multifunction station is one of such equipment uniting a soldering and desoldering functions in one block with digital temperature indication.
24.04.2018 | 914Due to its unique measurement range (up to 400000 Lux) and auto data logger availability ATE-1509 light meter significantly extends the capabilities of AKTAKOM light meter family.
13.04.2018 | 1260Aktakom AMM-1028 is a good combination of easy-to-use functions, safety and reliability. It features IP67 dust and waterproof, True RMS, rugged design for heavy duty use.
19.03.2018 | 881Professional and low-cost Aktakom AMM-1032 is a compact True RMS multimeter with a wide LCD (6000 counts) with large figures, backlight and analog scale. Built-in contactless AC voltage sensor allows user to quickly and safely check the circuit power availability.
05.03.2018 | 834When equipping modern electronics production it’s necessary to pay special attention to means of protection against electrostatic charging. A typical working place of an engineer or repair specialist should be not only structurally equipped, ergonomic, comfortable, but also equipped with necessary antistatic objects: chairs, desk mats, wristbands, tools, etc. Comfortable Aktakom AEC-3528 ESD chair would be a very good choice for your laboratory!
14.02.2018 | 1001Herewith we are glad to inform of new AKTAKOM software compatible with a wide range of AKTAKOM measuring devices, namely with several models of remote controlled DC power supplies, crosspoint switches and USB PC-based oscilloscopes.
06.02.2018 | 1048AKTAKOM ATT-8509 electromagnetic field meter is designed for the monitoring of electromagnetic fields which appear from different sources like cell phones, television antennas, wireless equipment, medical equipment, microwave devices, welding equipment, computers, industrial equipment etc.
22.01.2018 | 1099Aktakom APS-1006 low power switching DC power supply is foremost designed for educational purposes, it’s perfect for laboratory works since it’s very simple in use.
01.01.2018 | 1280Herewith we would like to introduce AKTAKOM APS-7306L DC programmable power supply which is the updated version of world famous APS-7305L. In 2013 at Best in Test Award competition annually held by American “Test & Measurement World” APS-7305L became the winner in 2 categories at once «Power supply» and «Test Product of the Year»!
13.12.2017 | 1351AKTAKOM APS-5333 is a high-performance linear DC remote controlled programmable power supply. The excellent features of this DC power supply include up to 100 output groups with configurable timer, high-resolution LCD display, extremely clean ripple and noise, comprehensive over-voltage over-current over-temperature protection.
01.12.2017 | 927Aktakom ATT-2590 is an infrared thermometer convenient for contact and contactless measurement of the surface temperature of objects.
13.11.2017 | 850Our Catalog keeps on including new models into its product range. We would like to introduce AKTAKOM ATH-1323 that has been recently replenished DC power supplies family.
06.11.2017 | 857AKTAKOM ACM-2031 clamp meter is designed for non-contact AC/DC current measurement as well as AC/DC voltage, resistance and other types of measurement.
30.10.2017 | 1024Our Catalog has been updated. Now there is one more model available in DC power supplies family. Herewith we are introducing AKTAKOM ATH-2335 power supply that you will find perfect for repairing or adjusting electronic equipment as well as for the use in research laboratories.
23.10.2017 | 924AKTAKOM ATK-2250 is a reliable, powerful clamp meter with an extended current range (up to 2.5 kA) for the operation in electricity generating units. Max. grip size for a wire: 2.6 x 0.9 in / 65 x 24 mm, grip diameter: 2.2 on / 55 mm.
16.10.2017 | 1278Quite often we receive questions from users concerning the operation of different measuring devices. In the present piece of news we’d like to answer one of them connected to the use of the special application software for Aktakom AM-1038 digital multimeter.
09.10.2017 | 969When diagnosing electronic equipment, various power supplies as well as measuring low currents with contactless method it’s not necessary to use a clamp meter with a large jaws. For such measurement tasks Aktakom clamp meter range has many clamp meter-multimeter models with a small diameter of coverage but at the same time high functionality like ATK-2001, ACM-2047 and ATK-1001.
02.10.2017 | 812Aktakom AMM-1022 is a professional handheld digital multimeter with LCD. Single rotary switch operation makes a measurement process very convenient. AMM-1022 multimeter is equipped with overload protection, low battery indication and data hold functions to make your work easier.
18.09.2017 | 903Aktakom ACM-1010 clamp meter is designed for non-contact alternate current measurement as well as AC/DC voltage, resistance and other measurements including temperature. Besides its perfect specifications and high performance Aktakom ACM-1010 is remarkable for its very low price – 39$ only! This is one of the most important factors considered when choosing the measuring instrument.
11.09.2017 | 872We’d like to introduce a new software from Aktakom! Aktakom COM-Terminal for Android is Android-based software designed to transfer and receive data via RS-232 serial protocol in the manual mode.
04.09.2017 | 888Just recently we published the news about new Aktakom APS-7306 power supply. We are glad to introduce a new model of power supply which is very similar to this model but which has its own unique features. Our range of Aktakom remote controlled power supplies includes now a new model – APS-7306L.
28.08.2017 | 897Aktakom AM-1152 multimeter is designed for measuring DC and AC voltage, resistance, capacitance, frequency, temperature, duty cycle, diode test and continuity test of electrical circuits. For the full-scale control of Aktakom AM-1152 digital multimeter they use Aktakom DMM Pro software. This software due to its wide range of capabilities to process the measurement data can turn an ordinary multimeter or several multimeters and a PC into efficient multichannel and multifunctional system.
21.08.2017 | 926Are you looking for a perfect tool for the work in electric control room? We are glad to suggest a new model of clamp meter – Aktakom ATK-2035 that recently has been added to our catalog.
14.08.2017 | 937We are ready to introduce a new model that is now included into our catalog – new Aktakom ATT-2590 IR thermometer. ATT-2590 IR thermometer is especially suitable when other temperature measuring methods are not acceptable.
07.08.2017 | 915Aktakom AM-1018 multimeter is designed to solve a wide range of electrotechnical measuring tasks. Moreover this model has built-in isolation tester function. On page of Aktakom AM-1018 multimeter, namely in Application tab you will find the detailed instruction for several measurement types.
31.07.2017 | 933Aktakom ACM-1009 tester is used for multicore cables testing. The tester is capable of controlling 16 cable cores automatically with further core number indication.
12.07.2017 | 1030Aktakom AM-1019 represents 5-in-1 device. On the one hand it is a digital multimeter, at the same time it also measures the illumination, noise level, humidity. The quality and variety of additional options performed in Aktakom AM-1009 allows you to choose the device suitable for your work.
03.07.2017 | 980High precision TrueRMS multimeter (basic error: 0.1%) Aktakom AMM-1149 has various service modes and functions. High speed graphic scale allows user to observe the changing dynamics of the value under measurement. This multimeter has a wide accessories range and a soft case for the most convenient use.
16.06.2017 | 939Dual-channel inductive soldering station Aktakom ASE-1203 meets the requirements for lead-free soldering and it is guaranteedly suitable for high quality traditional soldering.
08.06.2017 | 859Family of Aktakom digital multimeters keeps on including new up-to-date models! Herewith we would like to inform you of new Aktakom multimeters added to our Catalog – Aktakom AMM-1042 multimeter and AMM-1071 TrueRMS multimeter, successful combination of high precision (basic accuracy is 0.8%), perfect functionality and a low price.
29.05.2017 | 901Nowadays when equipping modern electronics production it’s necessary to pay special attention to means of protection against electrostatic charging. We are glad to introduce new models of Aktakom ESD-safe chairs.
17.05.2017 | 990Aktakom model range includes 2 new digital multimeter models now! We are glad to introduce Aktakom AMM-1015 and AMM-1037 TrueRMS multimeters which combine high measurement precision (basic accuracy is 0.1%), perfect functionality and a very low price.
02.05.2017 | 967Aktakom AME-1733 measuring datalogger represents a base system block for continuous low-speed analog-to-digital conversion on several analogue input channels with the capability of data transferring to PC via USB and LAN.
31.03.2017 | 937We are glad to introduce a new Aktakom model for smart home. Aktakom ACE-1768 8-channel USB / LAN input-output module is designed to remotely monitor the status of sensors (the sensors that have “on” or “off” output statuses) and to control discrete input devices that can be terminated with the monostable relay.
01.03.2017 | 956Aktakom AM-1061 digital multimeter provides multifunctional measurements, has a shockproof housing and remarkable for its durability. All these features make this model be a perfect multimeter for your daily work.
30.01.2017 | 1082All-purpose and reliable Aktakom ATK-2200 digital power clamp allows user to measure current and voltage strength as well as the value of active, reactive and full power in three-phase circuit of three- or four wires, balanced termination three-phase circuit, one-phase circuit of two- or three wires. These features make this power clamp perfect for electrical technician or power engineering specialist.
23.01.2017 | 1176Aktakom radio assembly equipment has been replenished with new models of soldering stations. New series consist of 6 new models: ASE-1111, ASE-1112, ASE-1115, ASE-1116, ASE-1119 and ASE-1128. New models have a wide range of the soldering tip temperature, compact dimensions and ergonomic design. Low cost of these new models makes them affordable to a wide audience starting from amateurs to professionals.
16.01.2017 | 995For those you are looking for a high quality and multifunctionality multimeter we would like to suggest Aktakom AM-1060 model. AM-1060 multimeter has various service modes and functions that significantly speed up the measurement process.
02.01.2017 | 1174If you are looking for a high precision DC power supply we are suggesting you to take a look at AKTAKOM model that is available for you in our Catalog. AKTAKOM ATH-1338 (30V, 20A. 1 channel) is a perfect power supply for science investigation, college, factory, electronic appliance maintenance and etc.
19.12.2016 | 1011Aktakom AMM-1022 digital multimeter is a reliable and low-cost measuring instrument used for typical measurements. This model is equipped with a large LCD (1999 digits) displaying large figures and symbols for easy reading.
05.12.2016 | 926The accuracy of high-end AM-1038 multimeter is 0.03%! It is designed to measure AC/DC, voltage, resistance, capacity, frequency, temperature, it can show dBm and allows data transferring to the PC via optically isolated USB interface. If you need awesome multimeter, this multimeter is for you!
21.11.2016 | 892Due to small dimensions and light weight as well as a wide range of functional capabilities the multimeter took the rightful place among modern test and measurement devices long time ago. They have become irreplaceable in diagnostics, repair and debugging processes especially in the field.
AM-1006 digital multimeter is a classical representative of this device type and it’s designed to measure AC and DC, AC and DC voltage, capacity, resistance, temperature, frequency, transistor amplification factor as well as for diode test and continuity test.
08.11.2016 | 950DC power supply range of our Catalog enumerates over 40 models with different technical specifications suitable for various types of measurement tasks. Herewith we would like to introduce one more model from AKTAKOM – ATH-2333.
17.10.2016 | 1380AKTAKOM AM-6000 digital milliohm meter is designed to measure low active resistance of circuits and their elements as well as the resistance of motor coils, transformers and also it can be used in debugging processes and for laboratory research.
19.09.2016 | 870Our Catalogue keeps on including new models! We would like to introduce a new model of 4-channel DC power supply. Aktakom ATH-4235 is a high-precision DC regulated power supply which is widely used in debugging process, repair and laboratory research. The model has 4 channel 2 of which can be adjusted and the other 2 are half adjustable.
05.09.2016 | 900Power supplies that are offered in our Catalogue have different number of channels. And since the range of models is quite wide you may easily choose the right one that will completely meet all of your requirements. Thus our Catalogue includes now a new model of Aktakom power supply with 3 channels. ATH-3243 high-precision DC power supply outputs smoothly adjustable stabilized DC voltage and stabilized current and has three channels: two of them are adjustable and the other one is fixed.
29.08.2016 | 1039ATK-2001 model is included into our wide range of AKTAKOM clamp meters. This model is a highly sensitive handheld clamp meter with AC/DC resolution of up to 0.1 mA/1 mA. ATK-2001 has an embedded universal multimeter equipped with a special input to connect measuring adapters with millivolt output.
What temperature range should be used for desoldering process when operating ASE-4313 ESD-Safe Temperature Controlled Digital Soldering and SMD Rework Station?
15.08.2016 | 978AKTAKOM ASE-4313 Temperature Controlled Soldering and SMD Rework Station is designed for a wide range of repair processes and combines 3 devices in 1: mounting soldering station, vacuum desoldering station, hot air gun. One of the most frequently asked questions concerns the temperature range that should be used for desoldering process when operating ASE-4313.
08.08.2016 | 961We focus on DC power supplies and are ready to offer you lots of models that you may choose basing on the specifications you require for work. At the moment you can find a new model of power supply. Aktakom ATH-1265 is a high-precision 1-channel DC regulated power supply that outputs smoothly adjustable stabilized DC voltage and stabilized current.
01.08.2016 | 1042Since soldering and rework processes when repairing electronics are usually made sequentially by one specialist it’s obviously convenient to use a universal system combining the features necessary for both operation types. Aktakom ASE-4203 professional multifunction station unites in one block a soldering station and rework equipment having a hot air gun and a soldering iron accordingly.
28.07.2016 | 956Recently we presented new models of Aktakom soldering stations. Herewith we’d like to inform that new ASE-1105 and ASE-1106 models are available from stock today already!
25.07.2016 | 1017Aktakom Units Converter is one of the first general purpose programs of Aktakom which represents smart and very simple in use values converter. AAUC allows you to quickly convert almost all measurement units into metric system and inversely. You may easily download it from Google play today already!
18.07.2016 | 967We always try to provide as full information about Aktakom measuring devices as possible. Sometimes we receive questions from our customers concerning the operation of some certain models. To make it easier for you we have prepared the answers for frequently asked questions and also provided all necessary information about the software for ATE-5035 Humidity and Temperature Meter and ATE-5035BT model with the Bluetooth interface as well.
11.07.2016 | 1002At the moment we are glad to present a new model of Aktakom power supply. ATH-1236 model is a high-precision DC regulated power supply widely used for repair and laboratory research.
06.07.2016 | 1224The family of Aktakom digital oscilloscopes includes now new ADS-6xxx series. At the moment this series includes 100 MHz models namely ADS-6122 and ADS-6122H. “H” index in ADS-6122H name means the devices represents a digital oscilloscope of very high resolution and there is 12-bit ADC used, therefore this oscilloscope can be used for research and analysis of complex and noisy signals where the features of 8-bit resolution oscilloscopes are not enough.
27.06.2016 | 977Rather often our customers ask us “How can I set the connection through the Internet to AAE-2712 which is connected to the router local network with private static IP address?” Find the answer in this piece of news.
20.06.2016 | 1027Our Catalogue enumerates variable power supply models suitable for different types of application. Herewith we introduce a new model of DC power supply which price you will find rather attractive.
The best cost effective solution! New Aktakom ASE-1105 ESD-Safe Temperature Controlled Soldering Station
13.06.2016 | 1096Soldering equipment list of our Catalogue includes now an absolutely new model of soldering station. Aktakom ASE-1105 soldering station is ESD-safe. Soldering iron of this new model is very light-weighted that will make your work maximum convenient.
06.06.2016 | 1024We would like to offer you new Aktakom software compatible with a wide range of Aktakom environment meters. Aktakom Smart Data Logger (ASDL) software is designed for data reading received from AKTAKOM ATT and ATE series devices, measurement data acquisition, its processing, displaying, including graphs, and saving to a mobile device with Android 4.0 or more advanced OS version.
30.05.2016 | 981At the moment AKTAKOM power supply sector includes one more new model. Herewith we would like to inform you about new APS-1721LS remote controlled programmable DC power supply and its advantages. AKTAKOM APS-1721LS is designed for laboratory, industrial and other engineering solutions due to its wide range of opportunities.
23.05.2016 | 1017AKTAKOM ASE-1209 ESD Soldering Tweezers are perfectly suitable for mounting on several types of soldering stations. These tweezers have the following parameters: power voltage is 24V and the consumed power is 100W, temperature range is 200…480 °C.
16.05.2016 | 1035Our Catalog keeps on including new models of measuring devices. We are glad to introduce a new model of DC power supply – AKTAKOM APS-1602LS. APS-1602LS is designed to supply radio equipment with stabilized voltage or current when operating in debugging process and repair. This single channel DC remote controlled programmable power supply with adjustable current limit can be used in service centers and research laboratories.
11.05.2016 | 1012We would like to inform that now Aktakom Smart Data Monitor software is available on Google Play for free and you may easy download it and use for your measurement tasks. Aktakom Smart Data Monitor (ASDM) software is designed for the connection to AKTAKOM ATT and ATE series via Bluetooth interface, for measurement data acquisition, its displaying and saving to a mobile device with Android 4.0 or newer OS.
27.04.2016 | 1030AKTAKOM ASE-4508 is a multifunction temperature controlled SMD rework station with digital indication and 700W power. ASE-4508 rework station is designed for various application spheres including: average and large service centers; repair of equipment for mobile communication and radio stations; repair of handheld technologies and motherboards; repair of local network equipment and net nodes.
20.04.2016 | 1150AKTAKOM AMM-1130 digital multimeter is a reliable handheld multipurpose instrument with a wide range of functions and built-in optically isolated USB interface. For your convenience we have added the detailed instruction of its operation in Application tab. Also you will find the answers for frequently asked question as well as the controls description on page of AMM-1130.
06.04.2016 | 1009AKTAKOM ACM-2036 clamp meter and multimeter in one is a compact device designed for the operation in AC/DC network.
01.04.2016 | 1036In 2016 there has been a news series of remotely controlled laboratory power supplies released – Aktakom APS-3xxxLS which has external triggering inputs and which are relevant to the group of LXI standard class C measuring devices. In order to use these laboratory power supplies in measuring systems there are several variants of Software Development Kits represented on our web site including APS-3xxxLx_SDK_Base; APS-3xxxLx_SDK and innovative Aktakom APS-3xxxLx_SDK_MS_VB SDK.
25.03.2016 | 1086At the moment our Product range includes an absolutely new model. This is AKTAKOM ACE-1748 8-channel USB / LAN input-output module which is designed to remotely monitor the status of sensors (the sensors that have “on” or “off” output statuses) and to control discrete input devices that can be terminated with the monostable relay.
18.02.2016 | 1078AKTAKOM AM-1118 multimeter has wide range of functions: from voltage measurement to temperature measurement with PC data transfer function via embedded optically isolated USB interface.
11.02.2016 | 1298AKTAKOM APS-3320L Single Output DC Regulated Bench power supply is based on a linear circuit of stabilization and structurally it’s assembled on SMD components. This circuit solution provides easy setting and control of the device, high stability of output parameters, low ripple and noise, and also it helps to significantly reduce the device dimensions.
04.02.2016 | 976AM-1118 multimeter support is now added to Aktakom DMM Light software of 184.108.40.206 version. Multimeter AM-1118 has wide range of functions from voltage measurement to temperature measurement with PC data transfer function via built-in optically isolated USB interface. Version 220.127.116.11 of Aktakom DMM Light software has been successfully tested and perfectly operates with Windows 10, Windows XP x32, Windows 7 x32, Windows 8 x32, Windows 8.1 x32, Windows 7 x64, Windows 8 x64, Windows 8.1 x64.
06.01.2016 | 1160Up-to-date AKTAKOM clamp meters allow you to measure this important parameter fast and efficiently without the network breakup. AKTAKOM ATK-2301 Watt clamp meter with max. resolution 10µA is designed to measure leakage current, this model allows measuring active (0,001W...9999kW), reactive and full power as well as power factor (cos ɸ).
23.12.2015 | 1378We would like to introduce a new series of AKTAKOM AHA-19xx plastic housings. At the moment the series include 6 models in different colors, sizes and features: AHA-1924, AHA-1924D, AHA-1925, AHA-1925D, AHA-1926 and AHA-1926D. Those housings which have “D” in their names have a battery compartment.
16.12.2015 | 1164AKTAKOM ATK-4001 clamp meter is designed for grounding resistance, leakage current measuring as well as for continuity test. This model allows user to take measurements only on one ground wire without using any additional electrodes, also ATK-4001 can be used to test multiple grounds systems without turning them off.
09.12.2015 | 1173AKTAKOM ACM-2036 TrueRMS clamp meter is a universal and compact device that combines a clamp meter-multimeter, non-contact voltage detector and a flashlight. From this piece of news you will get to know about its functions and capabilities.
04.11.2015 | 1129Our range of AKTAKOM power supplies is very wide. At the moment we are ready to introduce one more new model – AKTAKOM ATH-3335. ATH-3335 is an inexpensive power supply which outputs smoothly regulated stabilized DC voltage up to 30 V and stabilized current of up to 5 A.
28.10.2015 | 1088AKTAKOM electrical safety testers includes a new model now – ATK-6010 phase interlacing pointer. AKTAKOM ATK-6010 phase interlacing pointer is capable of determining phase interlacing when connecting to three-phase receivers (asynchronous / synchronous motors, driver, protectors, counters etc.).
21.10.2015 | 1205At the moment our product range has been updated. We would like to introduce a new model – new AM-7070 calibrator from AKTAKOM. High-end AKTAKOM AM-7070 voltage and current calibrator is the source of voltage and current calibrated values and it’s designed to generate DC voltage and current regulated signal when adjusting and testing sensors and other equipment in various types of application (repair service, oil and chemical industry, test laboratories, production and quality control, educational institutions).
14.10.2015 | 1109Now our product range includes a new model of carrying case – 37-5.
37-5 is a plastic shock and leak proof carrying case which is designed to carry devices and any other things that require careful handling and convenient storage. It protects portable devices from the damaging effect of moisture, dust and rust.
07.10.2015 | 1101Our catalogue includes now a new clamp meter model – AKTAKOM ATK-2200. This all-purpose and reliable digital power clamp allows user to measure current and voltage strength as well as the value of active, reactive and full power in three-phase circuit of three- or four wires, balanced termination three-phase circuit, one-phase circuit of two- or three wires. These features make this power clamp perfect for electrical technician or power engineering specialist.
30.09.2015 | 1119The range of our AKTAKOM electrosmog meters has been replenished with a new model – ATT-2593. AKTAKOM ATT-2593 electrosmog meter is a handheld device used to safely measure electromagnetic field characteristics with isotropic method in the frequency range of up to 8 GHz.
09.09.2015 | 1312AKTAKOM APS-1915 is a high voltage DC regulated power supply designed for the use when producing high voltage electronic devices, in debugging processes, repair or during laboratory research. This power supply provides adjustable high DC voltage.
02.09.2015 | 1141Model range of AKTAKOM power supplies includes now a new low-cost model – APS-5310. The present model is developed with the same housing and form factor as popular AKTAKOM APS-5305 switching power supply. These devices are designed for supplying radio equipment with stabilized voltage or current when operating in debugging processes, repair or during laboratory research. One channel of new APS-5310 has a capability to smoothly adjust the voltage at the range of 0 to 30 V and the current from 0 to 10 A (APS-5305: 0 to 5 A).
26.08.2015 | 1104Aktakom DMM Pro software is designed for the full-scale control of Aktakom AM-1142, AM-1152, AMM-1130, AM-1171 digital multimeters. This software due to its wide range of capabilities to process the measurement data can turn an ordinary multimeter or several multimeters and a PC into efficient multichannel and multifunctional sistem.
19.08.2015 | 1107Aktakom DMM Light software is designed to enter the current value into PC, to display it and the measurement history as a table or graph defining max, min and average values, to proceed and save the data received from AKTAKOM AMM-1130, AM-1142, AM-1152, AM-1171 multimeters into files.
12.08.2015 | 1227AKTAKOM ATK-2011 is a multifunctional AC clamp meter with a wide measuring range. Flexible magnetic conductor of ATK-2011 (about 6.7in / 170mm) is used for AC measuring up to 3000 A as well as allows readings in hard to reach areas and wire bunches. AKTAKOM ATK-2011 can record to the built-in memory up to 8000 logs.
05.08.2015 | 1101Our Catalogue includes a new programmable power supply model – AKTAKOM AEL-8320. This new programmable electronic load is designed to operate as a load when testing, setting and adjusting power units, amplifiers, sound-reproducing equipment and other radio assembly equipment with supply voltage of up to 80 V, up to 30 A load current, up to 250 W power consumption.
29.07.2015 | 1165There is some updating in our Catalogue in Power supply product range - AKTAKOM APS-1915, our new model.
22.07.2015 | 1121AKTAKOM ATK-4001 clamp meter is designed for grounding resistance, leakage current measuring as well as for continuity test. This model allows user to take measurements only on one ground wire without using any additional electrodes, also ATK-4001 can be used to test multiple grounds systems without turning them off.
15.07.2015 | 1395Practical and convenient bags AKTAKOM AHA-2504 and AHA-2505 will help you to organize your working space the best way. These tool bags can be used for carrying and storing tools, small instruments, and documentation. The durability and functionality of both bags are very high!
08.07.2015 | 1246AKTAKOM ATT-8509 Electromagnetic field meter is designed for the monitoring of electromagnetic fields which appear from different sources like cell phones, television antennas, wireless equipment etc. ATT-8509 Electromagnetic field meter is equipped with two three-axis probes capable of measuring electromagnetic field parameters in the wide frequency range from 100 kHz to 3 GHz.
01.07.2015 | 1123Compact AKTAKOM ATK-2040 watt clamp meter is designed for the work in direct and one-phase alternating current networks, it has built-in multimeter with voltage and frequency measurement function.
NEW! AKTAKOM ATH-2231, ATH-2232, ATH-2235, ATH-4012, ATH-2243 and ATH-2261 Analog Dual-Channel Power Supplies
10.06.2015 | 1239The product range of our Catalogue has been replenished with new devices, these are new models of AKTAKOM power supply: ATH-2231, ATH-2232, ATH-2235, ATH-4012, ATH-2243 and ATH-2261. These dual-channel models with digital indication are designed for repair and debugging processes as well as for laboratory research.
11.02.2015 | 1413Aktakom Android Units Converter is one of the first general purpose programs of Aktakom which represents smart and very simple in use values converter. AAUC allows you to quickly convert almost all measurement units into metric system and inversely.
03.06.2014 | 136321st Annual Education Technology Conference Campus Technology 2014 will be held on July 28-31 in Boston, MA, USA, Hynes Convention Center. The focus of Campus Technology is to allow attendees to explore the tools, strategies and innovations that provide them with the most up-to-date information on new tools, applications and services in intimate discussions and group settings.
24.04.2014 | 1745Under this trademark AKTAKOM manufactures and distributes Measuring and Scientific Instruments in the US and worldwide.
23.01.2014 | 1521There is new AKTAKOM ATE-7156 Coating Thickness Tester added to our Catalogue. This compact and handy gauge is designed for non-destructive, fast and precise coating thickness measurement.
17.01.2014 | 1301New AKTAKOM ASE-4554 Infrared Preheater has been added to our Catalogue. ASE-4554 has built-in thermometer to control heating, push button temperature, anti-static performance.
14.01.2014 | 1487There is a new device added to our Catalogue range. AKTAKOM ATE-1093 Thermo-Anemometer measures Air Velocity, Air Flow (volume) and Temperature.
10.01.2014 | 1419At the moment the description of AKTAKOM ATE-2530 Infrared Thermometer is completed with new images.
29.10.2013 | 1716We are glad to inform that AKTAKOM trademark has been successfully registered in the USA!
The registered AKTAKOM brand combines the wide range of test and measuring instruments of the highest Created by professionals for professionals, AKTAKOM’s mission is to provide clients worldwide with the highest quality testing equipment. Quality, innovation and precision are the hallmarks of all our products. Our team of scientists carefully selected every item that we manufacture and sell based on their personal experiences and implementation of the latest technologies.
01.02.2013 | 5216
The Test and Measurement World announced winners of the prestigious Best in Test competition. Finalists included: Agilent Technologies, Tektronix, National Instruments and many others. The Best in Test Awards winner in Power Supply category are AKTAKOM APS-73xxL Series Power Supplies. APS-73xxL Power Supplies are also chosen as the Test Product of the Year.
09.01.2013 | 1750International Expo CES, January 8 2013. Here at CES 2013, AKTAKOM has unveiled new technologies for Web and Android applications in AKTAKOM measuring devices. Among innovative devices exhibited are APS-7305L – finalist in Power supply category of the competition held by “Test & Measurement World” magazine – and ATE-9538 with AKTAKOM Environment Measurement A software.
07.12.2012 | 2427Annually famous American "Test & Measurement World" magazine holds Best in Test Award competition. AKTAKOM APS-73xxL series DC power supplies have for the first time become finalists for this competition in category "Power Supply".