News & Events
28.05.2018 | 168When laying or repairing cable routes it’s often necessary to detect cables and correctly determine their routes. And very often this is associated with a long time taken therefore, especially if the cable is located in a hard-to-reach place and if there are several cables in the conduit. Multifunctional AKTAKOM ACT-1112 cable locator is a perfect device for this type of work.
14.05.2018 | 228AKTAKOM AEL-8320 and AEL-8321 will change your point of view about the capabilities of low-cost electronic loads. The functions of these models are very similar to electronic loads of professional series.
03.05.2018 | 211Since soldering and desoldering processes when repairing electronics are usually made sequentially by one specialist it’s obviously convenient to use a universal system combining the features necessary for both operation types. AKTAKOM ASE-3101 professional dual-channel multifunction station is one of such equipment uniting a soldering and desoldering functions in one block with digital temperature indication.
24.04.2018 | 203Due to its unique measurement range (up to 400000 Lux) and auto data logger availability ATE-1509 light meter significantly extends the capabilities of AKTAKOM light meter family.
13.04.2018 | 209Aktakom AMM-1028 is a good combination of easy-to-use functions, safety and reliability. It features IP67 dust and waterproof, True RMS, rugged design for heavy duty use.
26.03.2018 | 247Aktakom ACM-2036 is TrueRMS clamp meter, universal and compact device that also provides multimeter, non-contact voltage detector and a flashlight functions.
19.03.2018 | 238Professional and low-cost Aktakom AMM-1032 is a compact True RMS multimeter with a wide LCD (6000 counts) with large figures, backlight and analog scale. Built-in contactless AC voltage sensor allows user to quickly and safely check the circuit power availability.
12.03.2018 | 235Aktakom ASE-2105 is designed for lead free desoldering. The quick heating and strong power are the best terms for clear soldering / desoldering of all DIP components types.
05.03.2018 | 231When equipping modern electronics production it’s necessary to pay special attention to means of protection against electrostatic charging. A typical working place of an engineer or repair specialist should be not only structurally equipped, ergonomic, comfortable, but also equipped with necessary antistatic objects: chairs, desk mats, wristbands, tools, etc. Comfortable Aktakom AEC-3528 ESD chair would be a very good choice for your laboratory!
14.02.2018 | 305Herewith we are glad to inform of new AKTAKOM software compatible with a wide range of AKTAKOM measuring devices, namely with several models of remote controlled DC power supplies, crosspoint switches and USB PC-based oscilloscopes.