News & Events
17.09.2018 | 608AKTAKOM APS-1503 DC power supply is used to supply radio equipment with stabilized voltage or current when operating in debugging process, repair and laboratory research.
10.09.2018 | 568It is a well-known fact that soldering works are associated with harmful substances emission. The most dangerous components of solder smoke are the particles of abietic acid (rosin) capable of causing asthmatic reaction. In addition rosin particles or decay products of flux as a rule are heavily polluted with lead which is really dangerous. The main device used to solve this problem is a smoke absorber. New AKTAKOM ASE-7012 is one of them
05.09.2018 | 637AKTAKOM ATH-8311 programmable electronic load is designed to emulate various load operation modes when researching and adjusting power supplies of wireless devices with up to 360 V supply voltage, up to 30A load current and 300W power consumption.
29.08.2018 | 477AKTAKOM AM-6007 milliohm meter is used to measure low values of resistance in circuits and their components, as well as contact resistance. Measurements are performed with 4-wire Kelvin clips that makes the measurement results much more precise.
22.08.2018 | 476Earlier to measure every single value you had to use 2 different measuring devices or do it one after another. What makes AKTAKOM AM-1109 multimeter special is the availability of 2 channels allowing user to take measurements of 2 values simultaneously.
06.08.2018 | 563AKTAKOM always provides precision equipment for professionals. And this is not only about test and measuring devices. Wide range of various tools in our store will help you to choose tweezers, pliers, cutters, screwdrivers or whole tool sets combining all necessary instruments for high precision work. AKTAKOM AHT-5069 screwdriver set is one of them.
16.07.2018 | 561One of the most popular AKTAKOM LCR-meters is AM-3001 which is widely used to measure LCR characteristics of radio-electronic components and electric circuits such as: inductance (L), capacity (C), resistance (R), quality factor (Q), dissipation factor (D) and deviation (Δ)
09.07.2018 | 990Low-cost AKTAKOM ATH-3333 power supply with digital indication is designed for the use in debugging process, repair or in laboratory research.
02.07.2018 | 697AMM-3035 RLC meter from AKTAKOM is a professional device which uses innovative technology allowing user to automatically measure the following parameters: inductance, capacity, resistance, Q factor, dissipation factor, phase factor.
AKTAKOM ASE-4313 multifunctional soldering rework station good solution for any repair and soldering task
25.06.2018 | 635AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.