News & Events
16.09.2019 | 5Multichannel AKTAKOM ATE-2036 thermometer and datalogger is capable of temperature measuring simultaneously on four channels using K-, J-, T-, E-, R- and S-type thermocouples or on two channels with platinum thermal resistance.
04.09.2019 | 36New Aktakom soldering station is a perfect addition to our soldering station range. Due to its compactness it occupies a very small working area making your work easy and convenient. In spite of its small size its power (8W) and wide temperature range (100°C - 450°C) allow ASE-1128 to make all types of work which can be made by any other more massive models.
21.08.2019 | 97AKTAKOM ASE-4509 rework station offers an excellent solution for desoldering work. It is very easy for operation and can be widely used in the repairing and reworking areas and on most SMD rework job, like SOIC, CHIP, QFP, PLCC, BGA etc.
07.08.2019 | 91AKTAKOM ATT-2592 portable electromagnetic field tester is designed for safe measurement of electromagnetic field characteristics by isotropic method. The device is equipped with a 3-channel sensor that allows taking measurements simultaneously on three axes: X, Y, Z.
26.07.2019 | 174AKTAKOM tachometers are specially designed for accurate measurements of rotation speed as well as the shaft angular velocity. AKTAKOM tachometers use various measurement methods: contact, contactless photo, contactless laser pointer. And the combination of different measurement methods in one device allows user to widen the application area. AKTAKOM ATT-6000 is a portable tachometer for noncontact measurement of rotation velocity in hard-to-reach places.
08.07.2019 | 119AKTAKOM ATE-8702 magnetic meter (gaussmeter or teslameter) can be widely used to measure magnetic field parameters in industry, materials science, electrical engineering and laboratory studies. This model has expanded capabilities for large values measuring. Due to various measurement ranges it can be used for different measurement tasks.
20.06.2019 | 116One of the important parameters of three phase networks is phase interlacing. Disregarding of this parameter can cause the equipment failure. AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.
07.06.2019 | 134For service engineers working in production it often becomes necessary to measure shaft speed. And shaft diameter as well as the operation conditions may be different. What should they do in this case? Of course they may buy and use two different devices – contact tachometer and contactless one. But there is some other more convenient solution to use a combined type tachometer like Aktakom ATT-6006.
24.05.2019 | 225AKTAKOM ATE-1034 hot-wire anemometer-thermometer is a compact device with wide functionality. Due to the small diameter of its probe (only 12 mm) this device is very convenient for using in hard-to-reach areas. Moreover the probe handle is extension-type (from 280 to 940 mm) which makes it possible to broaden the ranges of this anemometer use.
15.04.2019 | 574AKTAKOM APS-7205 is a high performance 3-channel DC remote controlled programmable power supply which is designed to power radio devices with stabilized voltage or current and it is indispensable when testing the reaction of electronic equipment to the supply voltage changes.