News & Events
02.07.2018 | 581AMM-3035 RLC meter from AKTAKOM is a professional device which uses innovative technology allowing user to automatically measure the following parameters: inductance, capacity, resistance, Q factor, dissipation factor, phase factor.
AKTAKOM ASE-4313 multifunctional soldering rework station good solution for any repair and soldering task
25.06.2018 | 541AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.
18.06.2018 | 457If your work requires the use of anemometer, hygrometer, thermometer and light meter you may purchase just 1 device combining them all. This model is AKTAKOM ATE-9508 4-in-1 multipurpose tester and it can be used to measure airflow speed, humidity, temperature and illumination level.
11.06.2018 | 836AKTAKOM AM-1081 is a digital multimeter used to measure DC/AC current and voltage, resistance, capacity, frequency, diode test and continuity test. The embedded accumulator can be charged with a handheld generator, also AM-1081 can be powered with batteries.
04.06.2018 | 407High-performance AKTAKOM AMM-3320 RLC meter is a compact and convenient device that allows user to take quick and precise (basic error is 0.3%) measurements of such primary and secondary parameters like inductance, capacity, resistance, phase angle, Q-factor and dissipation factor.
28.05.2018 | 733When laying or repairing cable routes its often necessary to detect cables and correctly determine their routes. And very often this is associated with a long time taken therefore, especially if the cable is located in a hard-to-reach place and if there are several cables in the conduit. Multifunctional AKTAKOM ACT-1112 cable locator is a perfect device for this type of work.
14.05.2018 | 592AKTAKOM AEL-8320 and AEL-8321 will change your point of view about the capabilities of low-cost electronic loads. The functions of these models are very similar to electronic loads of professional series.
03.05.2018 | 476Since soldering and desoldering processes when repairing electronics are usually made sequentially by one specialist its obviously convenient to use a universal system combining the features necessary for both operation types. AKTAKOM ASE-3101 professional dual-channel multifunction station is one of such equipment uniting a soldering and desoldering functions in one block with digital temperature indication.
24.04.2018 | 582Due to its unique measurement range (up to 400000 Lux) and auto data logger availability ATE-1509 light meter significantly extends the capabilities of AKTAKOM light meter family.
13.04.2018 | 490Aktakom AMM-1028 is a good combination of easy-to-use functions, safety and reliability. It features IP67 dust and waterproof, True RMS, rugged design for heavy duty use.