News & Events
05.10.2020 | 155AM-7111 multifunctional process calibrator is designed to generate high-precision signals when testing and calibrating different types of equipment (probes, measurers, converters, controllers etc.) during repair or adjustment work.
28.09.2020 | 188As you know one of the most important requirements for the operation with small and valuable electronic components is reliable protection from electro static discharge. Our Catalogue has a soldering station model now that meets this requirement...
21.09.2020 | 200Our Online store has a wide range of power supplies. AKTAKOM APS-7306 is a DC programmable power supply which is designed to power radio technical equipment with stabilized voltage and current in repair process, laboratory research.
14.09.2020 | 187AKTAKOM ATT-9002 is a portable vibration meter which is designed to measure unbalanced response of mechanisms. Parameters under measurement: rate, RMS and peak measurement, velocity / acceleration measuring range.
07.09.2020 | 197Aktakom AEL-8321 programmable electronic load is designed to imitate various load operation modes when testing the power supplies of wireless devices with up to 80 V voltage, current of up to 40 A and the power of 400 W.
31.08.2020 | 244AKTAKOM AM-1171 multimeter is designed to measure DC and AC, DC and AC voltage, resistance, capacitance, frequency, diode control and continuity test. AM-1171 model can be also used for temperature measurement and can be connected to a PC via USB interface.
24.08.2020 | 345AKTAKOM ATH-1253 is of the most popular power supplies which is widely used in debugging process, repair and laboratory research. ATH-1253 outputs smoothly adjustable stabilized DC voltage and stabilized current.
17.08.2020 | 189You no longer need to buy these two separate devices if you need them both for work. AKTAKOM ATK-2103 is a clamp meter but at the same time it can be used as a multimeter! ATK-2103 is capable of measuring up to 8 electric quantities, continuity testing.
10.08.2020 | 216The range of AKTAKOM soldering stations is very wide and variable. You may always choose the right model for your purposes. We would like to draw your attention to AKTAKOM ASE-1116 soldering station which is used in traditional types of soldering as well as for lead-free.
03.08.2020 | 289If you are looking for a clamp meter Aktakom ATA-2502 clamp meter-adapter will be the most cost effective solution. For work its necessary to have any multimeter or voltmeter capable of measuring DC and AC voltage at the range of 200 mV and 2 V. If you connect the adapter to the multimeter the measurement results will be displayed on the multimeter screen. And if you connect the device to the oscilloscope you will be able to research the waveform.